I can’t open the template because there is not enough memory. Try using a lower resolution or a lower number of colors.
During this session redrawing was slow because of low memory conditions. Upgrade your computer’s memory or close any opened application to accellerate redrawing.
The application will run slower than usual because the screen depth is not 256 colors. For best performance open the Monitors Control Panel and set the screen depth to 256 colors.
This application will not be able to receive data from networked applications because the “AppleTalk ADSP Tool” is not in the Extensions folder inside the System Folder.
To document contains too many colors and some of them will be grouped together. Remove some colors and the open it again.
The document is larger than the Worksheet. You can enlarge the worksheet with the OTHER… command in the WORKSHEET SIZE menu.
Text conversion is not supported for this data format. Please convert text into outlines before reading the data. Text commands will be ignored.
It is not possible to open or to create the “Kerning” file. Text will use the standard kerning information.
Adobe Type Manager is not installed and so Adobe Postscript fonts will not be available. You can still use True Type fonts.
Some fonts in this system use the same identifier, and this may cause problems with text objects. Use Font Harmony‚Ñ¢ or similar utilities to solve this problem or try to remove and then reinstall the fonts.
It is not possible to get the current page size from this plotter. The default page size will be used instead.
The specified overlap is too high. The higher allowed value will be used instead.
The specified page size is too large. The maximum allowed value will be used instead.
It is not possible to quit the application while it is plotting or has pending jobs. Terminate any job then retry.
The data in the desk scrap was created by a newer version of Punto. You should upgrade your application to use this data correctly. I will try to use it anyway.
Could not create a new document because the selected printing resource could not be found. Use Chooser to select a printer and try again.
Some information may be incorrect because one or more sections needs to be recalculated. RECALC then retry.
No matching items were found.
The document contains unknown data. Some parts of the document may be missing.
The document may contain some minor errors. Try to reread the document or correct the errors by hand.
The stitch density must have a value greater than zero. Enter a larger value or use the default values.
Click OPEN then select the file.
Insert the Tape in the Reader then press READ.
%ld object(s) in the clipboard
The selection contains a manual section and cannot have an effect applied to it. No modifications have been made to it. This message will not appear again.
The Repass must have a value between 1 and 100. Enter a correct value or use the default values.
The minimum stitch length must have a value greater than or equal to zero. Enter a larger value or use the default values.
The stitch length must have a value greater than zero. Enter a larger value or use the default values.
